Triton SJA200 Superjaws Workbench

Triton SJA200 Superjaws Workbench Review

Triton SJA200 Superjaws Workbench Feature

• Instant jaws adjustments from 0 to 36 inches with 360-degree access to work
• Heavy-duty, all-steel construction with corrosion-resistant epoxy powder coating
• Easily folded for storage and transport (set up or fold down in 20 seconds)
• Fast and easy hands-free clamping by using foot pedal
• Over 2,200 pounds of clamping pressure

Clamping and releasing your work has never been faster or easier. The adjustment of the jaw opening is instantaneous, this is not a screw vise so there are no handles to wind. Simply slide the moving jaw up to the work piece and press the foot pedal to apply the right amount of clamping force. To unlock, push the release plate for instant release. The clamping range is from 0 to 35 In. and the mechanism is capable of clamping forces well over 2000 Lb. but the user can regulate the pressure by applying light pressure on the foot pedal. Due to the 3 legged design it is incredibly stable on all surfaces and it can hold large and awkward pieces with the optional log gripping jaws. Super jaws is sold fully assembled and it is ready for use in about 20 seconds. It is easily folded for transportation and storage.

Rousseau Workbench System Steel Extender, 40" (6)

Rousseau Workbench System Steel Extender, 40" (6) Review

Rousseau Workbench System Steel Extender, 40" (6) Feature

• 40" extenders are 16-gauge steel
• Pre-drilled
• Legs must be purchase separately

These 40" extenders for the Rousseau workbench system are 16-gauge steel and come six to a box. Extenders can be mounted flush to support the top surface or 4" below the top to accommodate a drawer or woodworking vise. Extenders are pre-drilled to add sides and hinged doors for an enclosed cabinet and powder-coated with a durable black finish. Note: Legs must be purchased separately.

Eclipse 902-110 Magnifier Workbench Lamp - Black with Bench Clamp - 5X

Eclipse 902-110 Magnifier Workbench Lamp - Black with Bench Clamp - 5X Review

Eclipse 902-110 Magnifier Workbench Lamp - Black with Bench Clamp - 5X Feature

• Magnification Strength: 2.25x (5 Diopter)
• Illumination: 22W Fluorescent tube
• Sturdy construction
• All magnifying glasses made from actual glass
• Bright, long-lived light Fluorescent Tube

Gooseneck Magnifier Lamp - Latches onto a desk with the use of the clamp at one end as thick as 65mm thick. An energy efficient 22W T5 Circular Fluorescent tube Lamp provides a steady, shadow-less light source. A flipable Protective lens cover blocks the 2.25x magnifying glass when not in use. The Gooseneck allows full flexibility of the the lamp, allowing you to angle it in any direction needed.

Seville Classics Heavy Duty Commercial Workbench UHD20206

Seville Classics Heavy Duty Commercial Workbench UHD20206 Review

This durable easy to set-up 1.75-inch solid maple wood work table will help organize and create space anywhere you desire.

Torin Mobile Workbench - 54in., 1200-Lb. Capacity

Torin Mobile Workbench - 54in., 1200-Lb. Capacity Review

Deluxe Torin Mobile Workbench features large, sturdy hardwood work surface that can support up to 1200-lb. loads. Also has 2 open shelves and 2 locking drawers that can hold 100 lbs. Heavy-duty 4in locking casters. Steel with textured powder-coat finish. 54in.W x 20 1/8in.D x 39in.H. Easy assembly. Capacity (lbs.): 1,200, Material: Steel, Top Material: Hardwood, Dimensions W x D x H (in.): 54 x 20 1/8 x 39, Drawers (qty.): 2, Caster Size (in.): 4, Caster Type: Locking, Finish Type: Textured powder coat, Includes: 2 Open shelves

Edsal 6 ft. Steel Workbench - MRWB-6

Edsal 6 ft. Steel Workbench - MRWB-6 Review

Edsal 6 ft. Steel Workbench - MRWB-6 Feature

• Heavy duty 16-gauge steel frame for heavy duty use
• Strong particle board work area for tough jobs
• Rust-resistant enamel paint finish for a lasting look
• Pegboard backing and shelf tray 
• 2 smooth sliding drawers on ball bearing glides

Shop for Work Benches from AllWorkBenches.com! Designed to help you get the job done the Edsal 6 ft. Steel Workbench is built tough and features everything you need to keep your workspace organized and functioning smoothly. The all-steel frame can handle anything you put it through and it features a rust-resistant enamel paint finish so its looks last as long as it does. The particle board work surface is designed for heavy jobs and can really take a beating. The lower shelf is constructed of the same material so it can handle the heavy load of tool storage. Store cleaning products and other items on the handy shelf tray at the top. Everything will always be in easy reach from there. A pegboard backing is perfect for keeping your hand tools organized and two utility drawers are the ideal storage space for hardware and other small items necessary to get the job done. Some minor assembly is required. About EdsalFor over 30 years Edsal has been dedicated to providing companies with only the best quality storage systems and industrial furniture. Today products marketed under the Edsal brand name have earned a substantial share of the market in every region of the country.

The Bulldog Hardware 131588 Peg-A-System Ultimate Kit

The Bulldog Hardware 131588 Peg-A-System Ultimate Kit Review

The Bulldog Hardware 131588 Peg-A-System Ultimate Kit Feature

• 8 square feet of peg board (4 panels), 43 peg accessories
• Quick and easy installation with all hardware included
• Built-in spacers on panel back eliminate need for additional spacers
• Durable plastic construction designed to last
• Easy slide together connections

The Bulldog Hardware Peg-A-System offers a smarter way to organize your tools. Make use of the vertical space in your garage or workshop with durable, easy-to-install pegboard. This attractive plastic pegboard system boasts features not found in traditional perforated particle boards, and it offers tool-specific pegs and handy bins to keep your workspace free of clutter.

Peg-A-System At a Glance: Plastic pegboard is built to last--won't chip or warp Panels slide together for expansion opportunities Easy to install on drywall or studs--no spacing or backing strips required Available peg hooks and bins let you create customized storage

Create a customized place for hanging your tools, hardware, and more. View larger.

Plastic Pegboard is Built to Last
Peg-A-System's heavy-duty black plastic pegboard will create a high-quality tool board that is just as good looking as it is functional. Unlike traditional particle board, Peg-A-System's pegboard is made to last--it won't chip or warp.

Designed to Expand with Your Needs
Convenient connector strips between each panel allow you to slide together multiple panels for a secure fit and a smooth appearance. Best of all, it's easy to add more panels as your tool collection expands.

Easy, One-Person Installation
Built-in spacers on the back of each Peg-A-System panel make furring strips unnecessary, so you can hang your pegboards with ease. Each Peg-A-System kit includes all the installation materials you need to securely mount your pegboard on drywall or studs. In fact, a Peg-A-System is so simple to install, one person can easily handle the job alone.

Mount directly to a flat surface without extra materials

Panels slide together easily

Panels let you customize your workspace

Built-in spacers allow for easy installation

Tool-Specific Pegs and Containers
Make the most of the vertical storage space in your workshop or garage by taking advantage of the Peg-A-System's complete tool storage options. Featuring an array of both general peg hooks and tool-specific peg hooks, the Peg-A-System lets you create a customized place for hanging your screwdrivers, long-handled tools, wrenches, pliers, and more. Additionally, a variety of hanging trays and bins make ideal containers for small parts, hardware, and hand tools.

Choose the Peg-A-System Kit That's Right for You:
Pegboard Panel Kit Plastic Pegboard (2 Panels)	Pegboard Starter Kit Plastic Pegboard (2 Panels) 2" Peg Hooks (2) 4" Peg Hooks (2) 4" Double Peg Hooks (1) Twist Top Parts Bin(2) Parts Tray(2) 3/4" Curved Peg Hooks (4) 1-1/2" Curved Peg Hooks(4) 1-1/2" Angle Hooks (4)	Pegboard Ultimate Kit Plastic Pegboard (4 Panels) 2" Peg Hooks (4) 4" Peg Hooks (2) 4" Double Peg Hooks (1) 6" Brackets(2) 3/4" Curved Peg Hooks (6) 1 1/2" Curved Peg Hooks (6) 3/4" Angle Hooks (5) 1-1/2" Angle Hooks (5) Twist Top Parts Bin(2) Parts Tray (2) Screwdriver Holders(3) Multi-Screwdriver Holder (1) Multi-Tool Holder (1) Pliers Holder (3)

11/2" Thick Butcher Block Maple Top Workbenches

11/2" Thick Butcher Block Maple Top Workbenches Review

11/2" Thick Butcher Block Maple Top Workbenches Feature

• 60X30" COMFORT EDGE, FXD BNCH
• Virtually indestructible 11/2" Thick Butcher Block Maple Top Workbenches will not harm sharp tools or delicate machine parts.
• Laminated clear through, this top is warp-resistant and electronically Thermobonded for toughness.
• Penetrating oil finish contains pure mineral oil, raw linseed oil, and melted paraffin to seal out liquids.

Virtually indestructible 11/2" Thick Butcher Block Maple Top Workbenches will not harm sharp tools or delicate machine parts.Laminated clear through, this top is warp-resistant and electronically Thermobonded for toughness. Penetrating oil finish contains pure mineral oil, raw linseed oil, and melted paraffin to seal out liquids. Can be sanded down many times to reveal smooth working surface. Periodic applications of NSF-approved penetrating oil will help preserve top’s original composition. 16-gauge steel legs. 14-gauge steel stringer. Choose square or “comfort” edge top. Unassembled.NOTE: Shown with adjustable-height legs.NOTE: Adjustable-height legs are straight; fixed-height legs are flared.

Gladiator GarageWorks GAAC27MTRX 27-Inch Maple Top

Gladiator GarageWorks GAAC27MTRX 27-Inch Maple Top Review

Gladiator GarageWorks GAAC27MTRX 27-Inch Maple Top Feature

• Securely sets into place within raised module edges for long hours of hard work
• Standoffs allow for proper air circulation to help reduce warping due to seasonal temperature and humidity changes
• Designed to be cleaned easily with a damp cloth
• 26.375-Inch long x 23.625-Inch deep x 1-Inch thick

Solid maple top with four Standoffs that allow for proper air circulation to help reduce warping due to seasonal temperature and humidity changes.

Festool MFT/3 Multifunction Table

Festool MFT/3 Multifunction Table Review

Festool MFT/3 Multifunction Table Feature

• Can easily be carried to a jobsite, due to its compact size and lightweight.
• Accurate and repeatable cuts with the guide rail and plunge saw or routers.
• Clamp faster with uniform holes and Festool clamps.
• Use with legs folded out, at full height, or folded in and set on the floor.
• Cost effective, durable, long lasting design that offers maximum versatility.

The Festool MFT/3 Multifunction Table offers a portable, ergonomically designed workspace that's ideal for everything from rough cutting to fine sanding and assembly. It offers a perforated top that's easy to attach tools, guides, and work pieces to, side channels for attaching clamps, and folding legs that allow you to select from two working heights. More than just a table, this kit includes an adjustable stop, an angle unit (protractor head), a fence rail and fence rail clamp, an FS 1080 guide rail, and two guide rail supports.

Multifunction Table At a Glance: Perforated top and integrated side rails offer configuration options Ergonomic table height helps you work comfortably Large 43-3/8-inch by 28-1/4-inch workspace Support loads up to 260 pounds Folding design is sturdy yet easy to transport

Angle stop stabilizes fence end to ensure accurate cuts. View larger.

Perforated work surface and integrated side rails offer a wide variety of clamping configurations. View larger.

Integrated T-Groove side rail lets you easily connect two or more Multi-Function Tables. View larger.

Angle unit removes and attaches easily, remains stationary when needed, and has detents for common angles. View larger.

Rubber feet protect floors and prevent movement.

Threaded inserts protect work surfaces.

Ergonomically positioned tensioning knobs.

Large, Versatile, and Portable Work Area
Built to be sturdy, the Festool MFT/3 Multifunction Table offers a workspace that measure 43-3/8-inches by 28-1/4-inches, and can support loads up to 260 pounds. Whether you're cutting, routing, sanding, or simply prepping materials for assembly, this ergonomically designed table places your work at the perfect height of 35-7/16 inches, so you can focus on the task at hand instead of worrying about back strain or awkward tool positioning.

If you need more workspace than a single table offers, the table's integrated T-groove side rails can be used to quickly and easily connect two or more Multi-Function Tables to one another. Optional connectors (not included) fit into the side rails to create a sturdy, gap-free bridge.

The multifunction table weighs 54 pounds, allowing you to move it around your workshop or transport it to and from job sites.

Perforated Top Makes Clamping Easy
Designed to work with a large assortment of Festool clamps, the MFT/3 Multifunction Table offers a wide variety of clamping configurations that are ideally suited to both traditional materials and awkward, or oddly shaped, materials.

The table's perforated work surface offers plenty of attachment points. And while previous models of the Multifunction Table used a coarse wood screw for attaching the top, this most recent incarnation offers threaded inserts. These inserts not only prevent damage from over-torquing, but also establish a reference point that makes attaching the top quicker and easier.

Folding Legs Offer Safety, Utility, and Easy Transport
Folding legs make transporting the MFT/3 Multifunction Table to and from job sites easy by providing it with a lightweight, compact profile. The tensioning knobs for the legs are placed far enough from the sides of the table so that you don't have to worry about pinching or banging your hands as you secure the legs. And while you're working you don't have to worry about the table sliding or marking floor surfaces, thanks to the rubber foot caps on the legs.

By allowing you to place the work surface cleanly on the ground, the table's folding design also offers a second workable configuration that's ideal for keeping your tools and clamps at hand for applications like installing flooring.

Includes Guide Rail, Angle Unit, and Angle Stop
Able to deliver precise, splinter-free cuts that are safer than cuts made with a conventional table or radial arm saw, the MFT/3's integrated guide-rail system allows you to make accurate cuts up to three inches deep. Plus it can handle materials that measure up to 27-9/16 inches wide.

In addition, the included angle unit allows for precise, repeatable cuts. Featuring detents at common angles and an easy-to-adjust design, this unit allows you to leave the guide rail and saw in one place while repositioning the work piece and fence. Compared to a miter saw setup where the entire saw head must be repositioned, this saves you time and frustration when it comes time to change cut angles. Plus the angle nit attaches to the table using the V-Groove side rail, enabling easy repositioning, removal, or reattachment.

Also included is an angle stop, which also attaches to the Multi-Function Table using the V-Groove side rail. This stop prevents movement of the angle unit by stabilizing the end of the fence, and it can easily be removed or repositioned using a simple, secure locking knob.

The Festool MFT/3 Multifunction Table is backed by a three-year limited warranty and a 30-day money-back guarantee.

What's in the Box
Festool MFT/3 Multifunction Table, adjustable stop, angle unit (protractor head), fence rail and fence rail clamp, FS 1080 guide rail, and two guide rail supports.

The New and improved MFT is taller and is 15 lighter than the previous model (MFT 1080) but still provides a strong, sturdy, portable worktable whose guide rail, dual position fence, swivel unit, and stops make clean cuts and precise angles fast and easy. This multi-function table enables a Festool plunge saw to function as a chop saw, radial arm saw, and miter box. When used with Festool routers and saws, exact repeat operations are performed with ease. Features: large support area for safe cutting quick and easy setup and breakdown, foldaway legs with easier to access tensioning knobs, angle stop can be used in any position on the table, adjustable leg to accommodate uneven surfaces while keeping the table level, height-adjustable guide rail lowers onto work-piece for safe sawing of small and narrow work. Table is 28-1/4" x 43-3/8", 35-1/2" high, weight 62 lbs, and folds to 7-3/32", maximum work thickness 3-1/16", maximum working width 27-9/16", working height 35-7/16". Includes (2) guide rail supports, angle unit, fence rail, adjustable stop and guide rail FS 1080. Festool products can only be sold in the 50 states.